Suzhou Drimaker Machinery Technology Co., Ltd
Drimaker Machinery, Your Drink Manufacturer!
Add to Cart
Automatic Glass Bottle Washing Machine / Rinsing Inside Brushing System
Glass bottle washing machine description:
Automatic bottle washing machine set, used for a variety of specifications of new, old beer, wine, beverages, large infusion bottle cleaning; A set of units can be with the filling machine, the capping machine into washing bottles, filling, capping automatic line supporting production, according to the needs of users, can also provide a single machine, complete a single cleaning function
The cleaning process of the bottle is as follows:
Bottle inlet - Soak spray - - Brush - Spray with clean water - - Drain -- Bottle outlet
Among the process: the temperature of hot alkaline water is 50-75℃, and the concentration of alkaline water is about 2.5%
Liquid bottling machine parameters:
| No | Item | Details |
| 1 | Capacity | 5000-9000 bottles per hour |
| 2 | Bottle size | ø50—ø82mm |
| 3 | Bottle height | 180—290mm |
| 4 | Bottle mouth inside diameter | Large than 15mm |
| 5 | Labeling removing rate | Large than 95% |
| 6 | Bottle cleaning rante | Large tha 92% |
| 7 | Bottle broken rate | Less than 0.9% |
| 8 | Machine weight | About 4000KG |
Glass bottle washing machine details:
Bottle soaking:
After the bottle enters the soaking machine, the spray pipe group first carries on the pre-spray to the inside and outside surface of the bottle, causes the bottle to be heated evenly, then, carries on the following process: the high-pressure spray bottle inside and outside -- pours out the bottle the partial sewage -- immerses -- pours out the sewage -- the bottle circulation 3-4 times, after such treatment the bottle, the trademark and the dirt has been removed.
Cleaning and draining inside the bottle:
Brush inside the bottle into the drain machine, with drum for intermittent rotation, when the bottle in a horizontal position, body by high speed rotating brush to brush the bottle to drive into the bottle washing, washing, brush, roller turned an Angle and installed on the frame of a row of sprinkler spray to tap water in the bottle, namely when the bottle in a vertical downward position, by water valve automatic control of another exhaust nozzle is to enter the spray bottle, and then into a drain, drain after cleaning the bottle was sent out.
Main mechanism and working principle of bottle feeding machine:
Bottle feeding machine is mainly composed of nose, tail, side plate, flat-top sprocket, flat-top chain, railing, tensioning mechanism and machine foot.
The power is input by the motor after decelerating, and the flat-top chain is driven by the flat-top sprocket.
After the bottle is loaded on the bottle feeding machine, namely with the movement of the flat top chain, the conveying of the bottle is completed. The conveying speed is 10 meters/min, and it can also be adjusted according to the needs. The width and height of the railing can be adjusted according to the specifications of the bottle.
Thanks!
For more information please contact us!